Best Microphone For Hi Hat


What do you feel like in the event that you cannot find the best microphone for hi hat? Its a shame we guess. Well if you go through the various best microphone for hi hat available on our site we are sure you will find the right one for you.

Before recommending any product we test it by purchasing the product and then call our expert team to report their findings on each products. The process cost us thousands dollars on a monthly basis. This way you dont fall into the trap of buying the wrong product that will not give you an excellent value for money.

Table of Contents

Best Microphone For Hi Hat – Comparison Table

Best Microphone For Hi Hat – 2023 Review | Which Is The Best


What We Like About This Product


1. AMHHH Mic Holder for Hi Hat

What We Like About This Product

  • Works for Hi Hats

2. Samson C02 Pencil Condenser Microphone Pair for Vocals, Acoustic Guitars, Pianos,...

What We Like About This Product

  • OFFERS ACCURATE SOUND REPRODUCTION - The Samson C02 Condenser Microphones have small 12mm diaphragms and matched within +/-0.5dB sensitivity. They capture every sonic nuance with high precision.
  • CAPTURES CRYSTAL-CLEAR AUDIO - The tight cardioid polar pattern picks up sound sources in front of the mic capsule and rejects off-axis noises. This increases the noise isolation and reduces unwanted feedback.
  • EXCEPTIONALLY HANDLES LOUD SOUND SOURCES - The stereo pair can withstand up to 134dB SPL. You use C02 for miking acoustic instruments, overhead drums, and cymbals, as well as vocals.
  • OFFERS REDUCED P-POPPING AND WIND NOISE - The Blucoil Boom Arm Plus Pop Filter helps minimize the wind noise and plosive sounds by blocking air blasted from your mouth. It disperses the air pressure within the 2-layer mesh pop filter.
  • INCLUDES - Samson C02 Pencil Condenser Microphone Pair; Mic Stand Clips; Carry Case. 2-Pack of Blucoil 10-Foot Balanced XLR Cables - Premium Series 3-Pin Cable for Microphones, Speakers, and Pro Devices (Male-to-Female). Blucoil All-in-One Microphone Boom Arm Plus Pop Filter.

3. Samson C02 Pencil Condenser Microphones (Pair) for Acoustic Guitar, Piano, Overhead...

What We Like About This Product

  • OFFERS ACCURATE SOUND REPRODUCTION - The Samson C02 Condenser Microphones have small 12mm diaphragms and matched within +/-0.5dB sensitivity. They capture every sonic nuance with high precision.
  • CAPTURES CRYSTAL-CLEAR AUDIO - The tight cardioid polar pattern picks up sound sources in front of the mic capsule and rejects off-axis noises. This increases the noise isolation and reduces unwanted feedback.
  • EXCEPTIONALLY HANDLES LOUD SOUND SOURCES - The stereo pair can withstand up to 134dB SPL. You use C02 for miking acoustic instruments, overhead drums, and cymbals, as well as vocals.
  • REQUIRES +48V PHANTOM POWER - The Samson C02 Pair is powered with 48V phantom power. These condenser mics are compatible with audio interfaces with mic preamps. *NOTE: Do not plug directly into a computer.
  • INCLUDES - Samson C02 Pencil Condenser Microphones Pair; Mic Stand Clips; Carry Case. 2-Pack of Blucoil 10-Foot Balanced XLR Cables - Premium Series 3-Pin Cable for Microphones, Speakers, and Pro Devices (Male-to-Female). 5-Pack of Blucoil Reusable Velcro Cable Ties

4. Shure SM58 Cardioid Dynamic Vocal Microphone with Pneumatic Shock Mount, Spherical...

What We Like About This Product

  • INDUSTRY STANDARD - The first choice for performers around the globe, the SM58 Dynamic Vocal Microphone is ready to bring any performance to life. From the club to the stadium, Shure has your back.
  • CLARITY & CARE - The uniform cardioid polar pattern reproduces every note as it was intended, delivering warm, crisp sound time after time.
  • LEAVE BACKGROUND NOISE BEHIND - The SM58 has a spherical mesh grille and built-in pop filter to keep any unwanted noise out of the mix.
  • DROP THE MIC - The durable construction and break-resistant stand adapter makes the SM58 the perfect companion on the road, going strong through the toughest performances.
  • VERSATILE - The SM58 can hold its own live onstage as well as in the studio, isolating between vocals and instruments.
  • WHAT’S IN THE BOX - Shure SM58 Dynamic Vocal Microphone, 1 - A25D Swivel Stand Adapter, 1 - 95A2313 Storage Bag, Free 2-YEAR WARRANTY included.

5. HyperX QuadCast - USB Condenser Gaming Microphone, for PC, PS4, PS5 and Mac,...

What We Like About This Product

  • Radiant red lighting with dynamic effects: Stunning red lighting and dynamic effects for an eye-catching shot of customizable style.
  • Built-in anti-vibration shock mount: Isolate the mic and suppress the sound of unintentional rumbles and bumps with the elastic rope suspension.
  • Tap-to-mute sensor with LED status indicator: Use the convenient tap-to-mute functionality to prevent an audio accident along with the help of the LED mic status indicator. If the light is on, the mic is active, if the light is off, the mic is muted.
  • Four selectable polar patterns: Choose between four polar patterns (stereo, omnidirectional, cardioid, bidirectional) to optimize your broadcast setup and keep the focus on the sounds you want to be heard.
  • Gain control adjustment: Easily adjust your mic sensitivity by turning the dial at the bottom of the QuadCast.
  • Versatile adapter fits 3/8-inch and 5/8-inch threaded setups, compatible with most mic stands or boom arms. The internal pop filter helps block plosive sounds from hitting the mic, and you can monitor the mic via the headphone jack.
  • Get great sound whether you’re connecting to a PC, PS5, PS4, or Mac. QuadCast is certified by Discord and TeamSpeak, and works on major streaming platforms like Streamlabs OBS, OBS Studio, and XSplit.

6. Blue Snowball iCE USB Microphone for PC, Mac, Gaming, Recording, Streaming,...

What We Like About This Product

  • Custom Condenser Capsule: Powered By Blue’S Custom Condenser Capsule, Snowball Ice Microphone Delivers Crystal-Clear Audio Quality That’S Light-Years Ahead Of Your Built-In Computer Microphone
  • Cardioid Pickup Pattern: Captures Your Voice With Clear, Focused Sound For Streaming, Podcasting, Broadcasting, Skype Calls And Zoom Meetings
  • Stylish Retro Design: Record Or Stream In Style With A Classic Recording Equipment Design That Looks Great On Your Desktop And On Camera
  • Adjustable Desktop Stand: Allows You To Position The Condenser Microphone In Relation To The Sound Source, Improving Sound Quality And Saving Space On Your Desktop For The Optimal Broadcast Setup
  • Skype and Discord certified: Whether conducting interviews over Skype, streaming live gameplay on Twitch, or communicating across the globe, you’ll be heard loud and clear on leading VOIP platforms

7. Blue Yeti Nano Premium USB Microphone for PC, Mac, Gaming, Recording, Streaming,...

What We Like About This Product

  • Legendary Blue Broadcast Sound – Two Custom Mic Capsules Give Your Voice Exceptional Presence And Detail For Professional-Level Recording And Streaming
  • Blue Vo.Ce Software: Craft The Perfect Broadcast Vocal Sound And Entertain Your Audience With Enhanced Effects, Advanced Modulation And Hd Audio Samples. Advanced Blue Vo.Ce Is Compatible With Yeti, Yeti Nano And Yeti X. To Access Blue Vo.Ce, Please Download Logitech’S Free G Hub Software
  • Multiple Pickup Patterns – Cardioid And Omni Pickup Patterns Are Perfect For Pro Recording And Streaming
  • No-Latency Monitoring – Onboard Headphone Output And Volume Control For Ensuring Great Sound

8. Audio-Technica AT2021 Cardioid Condenser Microphone ,Black

What We Like About This Product

  • Condenser design for studio-quality vocal and instrument applications; ideal for acoustic guitar, overheads, piano and group vocals
  • Excels in high-SPL applications with extended response for smooth, natural sonic characteristics
  • Low-mass element for superb transient response
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Rugged design and construction for reliable performance
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

9. Professional Pencil Condenser Microphones 1PCS

What We Like About This Product

  • Cardioid Pickup Pattern
  • Gold-plated XLR connectors
  • Carry Case & shock-mounted mic clips included

What We Think About The Best Microphone For Hi Hat

How Polar Patterns Affect the Sound of a Microphone

A microphone can be directional or bidirectional. An omnidirectional microphone is the most sensitive in the front while a bidirectional microphone is sensitive in the back. These microphones can pick up two different sources of sound but most people use one side only. A bidirectional microphone can pick up high and low frequencies equally well though it can be less sensitive at the sides.


You may not have been aware of this but microphones usually have an output and load impedance. These measurements are important because electrical audio signals are AC voltages and impedance is a measure of AC resistance. Microphones typically have low output impedances of around 200 ohms. This allows you to use a microphone for a long distance without degrading the quality of the sound. In contrast if you have a high-impedance microphone you will lose the high-end sound when running the cable for even 30 feet.

When selecting a microphone the output impedance should match the input impedance of the preamp. When the output impedance is matched maximum power will be delivered to the input circuit. However this technique is not recommended for professional microphones and can result in 6 dB of signal loss.

Polar pattern

A microphone’s polar pattern describes how it responds to sound waves. It helps determine whether the microphone is right for a particular application or situation. In filmmaking it’s useful to understand the different patterns so that you can select the right one for the job. Here are a few different types of polar patterns and how they affect the sound of a microphone.

Omnidirectional Mics: Omnidirectional microphones are the most common for recording instruments and live vocals. They have the highest side rejection but the least bass response. However they are prone to handling noise and wind.

Self-noise level

A microphone’s self-noise level is an important measurement when working with audio signals. This measurement reflects the correlation between the noise generated by a microphone and the sound it receives. Generally a low self-noise level is desirable especially when working at low sound pressure levels. A low self-noise level is an important factor because it helps prevent sounds from getting drowned in microphone noise. It also determines the lower limit of a microphone’s dynamic range. Self-noise is usually expressed in decibels (dB(A) scale) and good results are generally defined as SPL less than 15dB.

When choosing a microphone you must consider the self-noise level of the microphone. Low self-noise levels are crucial for recording ASMR or low-volume talks. The signal-to-noise ratio (SNR) of a microphone is 94 dB at one kHz. However a microphone with 14 dB of self-noise has a signal-to-noise ratio of 80dB.


The sensitivity of a microphone is a measurement of its response to sound. It is calculated against a reference baseline and sound level typically at 94 dB SPL. The measurement is typically in millivolts per pascal. A higher sensitivity means a microphone is more sensitive to sound.

The sensitivity of a microphone is determined by its ability to convert sound waves into an output signal. In audio recording sound waves cause a vibration in the ear drum which is translated by the brain into sound. The stronger these vibrations the higher the volume. The sensitivity of a microphone is determined by its ability to detect these vibrations and convert them into an accurate signal. A microphone measures the sound pressure levels with internal components known as diaphragms which are often thin. A microphone with a thin diaphragm is generally more sensitive while a device with a larger diaphragm will need to register more sound waves in order to produce a high-quality signal.

The sensitivity of a microphone is the amount of signal it can pick up without any gain or compression. Some microphones are more sensitive than others which means you’ll need to use a higher preamp with them. For this reason you should make sure you choose a microphone that is sensitive to what you’ll be recording.

Factors to Consider Before Buying a Microphone

Buying a used microphone

When buying a used microphone it’s important to consider the condition of the mic. Many mics require a new capsule which can cost more than buying a new one. A bad capsule is like buying a used car with a broken engine. To avoid this always ask the seller to provide a warranty or refund if the microphone is not in working condition.

Although used microphones may have lots of scratches they may still sound great. Ask for HQ pictures of the microphone and be sure to examine all exterior areas for damages. Most scratches will be caused by improper handling or dropping. If you buy a used microphone from a reputable seller they will inspect the microphone and check for damages.

If you can’t find an online seller who sells used microphones you can also visit a music store like Musician’s Friend which has a wide variety of used microphones for sale. The owners of high-end microphones are likely to be knowledgeable about the mic’s capabilities and they will be more than willing to help you with questions. In addition they may be able to offer you some guidance on how to use your new microphone. Many high-end microphones are also serviceable and repairable. Many manufacturers even sell individual parts for expensive microphones so if something is wrong you can fix it.

Buying a used microphone from a company that makes professional mics

Buying a used microphone from a manufacturer can save you a lot of money. However you should be careful before making a final decision. Mics can be scratched and can have a lot of problems. Even if you’re the best singer in the world you can’t guarantee that your recording will be great if you don’t pay close attention to the quality of the microphone. In addition you should be aware that microphones can only withstand so much abuse before they become too worn and prone to breaking.

Most reputable microphone manufacturers make each microphone one at a time and this allows for the highest level of quality and attention to detail. This type of manufacturing requires a lot of time and money but ensures that the mic will be in top condition when you purchase it. Additionally these manufacturers usually have lifetime warranties and fast response times.

The price of a good quality microphone varies but a good one costs around $300. However you can find cheaper alternatives for less than $150 which will give you good audio quality. However if you plan on recording professionally you should consider buying a higher-end mic.

Buying a used microphone online

When buying a used microphone online you’ll want to pay special attention to the condition of the unit. If the seller is selling an item as is you can expect a certain level of wear and tear but you’ll also want to check whether it’s in good condition. Make sure to check the condition of the mic with a professional audio tech before you make the purchase.

A used microphone may have scratches on the exterior but it may still work well. These marks are common for microphones that have been dropped or mishandled. Generally a microphone can only take so much abuse before something comes loose. Be sure to ask the seller for HQ photos of the microphone’s condition. You’ll also want to check if the microphone has any cosmetic scratches on its exterior. Usually scratches appear on the exterior due to drops and mishandling so make sure to look at all sides of the mic to ensure it’s in perfect condition. If you don’t have a budget for a new microphone opt for an older model. Older models are often in better condition than new ones and they will cost much less.

Another advantage of buying a used dynamic microphone is the fact that the risk is extremely low. Most used dynamic microphones are made from durable materials so they will continue to work even after decades of use. This is especially true for microphones that are designed to be versatile such as the Shure SM57.

Buying a used microphone on the condition that it is checked by a tech

When you are buying a microphone it is essential to check it by a technical expert. There are a few ways to get a microphone checked. One way is to offer a refund if it doesn’t work out. Another way is to ask the seller for a tech’s opinion about the mic. While it may be tempting to buy the first microphone you come across a technical expert can offer you an objective assessment.

Another benefit of buying used equipment is that you can get the best value for your money. The more you save the more you can invest in other recording equipment to enhance your recordings. Most used microphones are priced up to 20% less than brand-new models. The exact cost difference will depend on the condition of the microphone. In some cases used mics can be as low as half of the price of new models. This can make a lot of sense if you’re on a budget.

The downside to buying a used microphone is that you don’t know what to look for in a used microphone. Sometimes the used microphone is in good condition but it’s difficult to determine how much it’s worth. If you buy a used microphone it will often cost less than new and you’ll have to pay for repair work later. If you buy a brand-new microphone you’ll have some peace of mind during the first couple of years. Otherwise you run the risk of getting a faulty microphone.

Frequently Asked Questions About Microphones

When purchasing a microphone you need to determine what you will use it for. In addition you will need to know what recording characteristics you desire. This article will give you a basic overview of the various types of microphones and help you choose the right one for your purposes. It also lists the pros and cons of each type.

Shotgun capsules

The SSH-6 stereo shotgun capsule has a directional center microphone and bi-directional side mics to capture sounds on the left and right sides. This allows you to capture a stereo image even with a mono mix making it ideal for video and film projects. It also has a high sensitivity and low noise level making it perfect for recording dialogue.

Another option is the MMC4017 Shotgun Microphone Capsule. This highly directional shotgun microphone has a high pickup angle and excellent off-axis rejection. It is also lightweight and designed for use with camera audio equipment. It provides clean and accurate broadcast audio.

Cardioid capsules

Cardioid microphones have a heart-shaped pickup pattern that captures sound from the front and sides. These mics are less popular than omnidirectional microphones which capture sound from all directions. However they are an excellent choice for interviews and other recordings. The wires from these microphones carry the signal from the microphone to an audio interface or motherboard.

There are many different types of cardioid capsules which make selecting the right one important. These capsules can be paired with a microphone to produce a variety of sonic characteristics. For example a cardioid capsule can amplify the bass response when used with a cardioid microphone.

Omnidirectional capsules

There are a number of different types of omnidirectional capsules available. These can be used to capture sound in any direction. Some of these capsules are better for certain applications than others. Depending on the kind of sound you want to capture you might want a narrow wide or omnidirectional pattern.

There are many benefits to using omnidirectional microphone capsules. One of them is their ability to pick up the most details even the smallest details. They also have a flatter frequency response which is perfect for recording. Omnidirectional microphones can be combined with preamplifiers made for specific applications.

Dynamic capsules

Microphones use dynamic and condenser capsules to convert sound waves into mic signals. Both types of capsules feature diaphragms and a housing though the actual design of the parts varies slightly. The diaphragm is an extremely thin movable membrane that receives sound from the front. It is attached to the backplate and a tensioning ring to keep it in place. There are also electrodes attached to the backplate and diaphragm that extract the mic signal.

The diaphragm of a dynamic microphone has the capability of varying in size to reduce noise within the A-weighting curve. This allows the microphone to operate at lower levels of broadband noise.

Electret capsules

What is the difference between condenser and dynamic microphone capsules? Condenser microphones as the name suggests have diaphragms with electrodes attached to the edges. Dynamic microphones on the other hand use a ribbon-like transducer with a corrugated metal ribbon stretching within a gap of air. A ribbon microphone also uses a two-wire system one for the audio signal and the other for ground.

Different capsule designs have different resistances. Dynamic microphones require a higher resistance. The resistances of a microphone can vary from one to three gigohms. An electret microphone has a high-end price tag and some manufacturers make these microphones only available to their own company.


We thank you for taking the time to read our article on the best microphone for hi hat. We hope that weve been beneficial enough and that will make the right purchasing decision from what you have discovered here.

Our team of experts on the best microphone for hi hat continuously and we may even add new products on the short list of ones we have recommended. We could also downgrade or upgrade the position of any of the products if we see an enhancement in its performance.

Leave A Reply

Please enter your comment!
Please enter your name here

3 × four =