Cleaning your turntable needle is an essential part of maintaining your record player. To avoid scratching or damaging your record, regularly clean the needle to keep it in good condition. Generally, regular cleaning is the most effective method. You can also use melamine foam pads, which are a popular method of cleaning a turntable needle. However, be sure to use a soft cloth to prevent scratches and dirt from building up.
Ways To Clean Turntable Needle
You can clean the needle with a dedicated stylus brush and cleaning solution. A clean cloth will be ideal, as the cleaning fluid will help loosen any deposits stuck on the stylus. If you have a vinyl player, use a solvent-free alcohol solution. For more stubborn deposits, you can use a fluid cleaner. A non-abrasive liquid cleaner is best, but a cloth can be used for a thorough cleaning.
Also Read: How To Make A Turntable
If you don’t have a special tool to clean the stylus, you can use a magic eraser or melamine sponge. Both of these products are safe for the stylus, provided you use them properly. For liquid solutions, you should always read the instructions carefully before using them on the stylus. A solution for cleaning the stylus might damage the cartridge. A solution that is based on alcohol may cause damage to the stylus.
Occasionally, you may find that you have to replace the stylus. The sound of your record will decrease, so cleaning the needle is recommended every few weeks. Then, you can try using a carbon fiber brush or an eraser made with cleaning fluid. It’s very important to use a clean, dry cloth to avoid any damage to the stylus. You should also use a damp cloth when washing the stylus. This will help get rid of any dirt and debris that may have settled on it.
Read Also: What Are The Rules For Sampling Music
You can also use a degreaser as a substitute for cleaning the stylus. A degreaser is a multipurpose solution that will help break up dirt stuck on the diamond tip. It can also be used to clean the stylus. It works effectively by wiping the surface of the cartridge. To clean the stylus, you should use a melamine eraser and cotton bud.
Alcohol can also be used to clean the stylus. It will help to remove stubborn dirt accumulations and will not cause your turntable to sound as good as before. If the needle is too dirty, you should use rubbing alcohol without water. Rub the rubbing alcohol on the stylus using a melamine eraser. Ensure to move it in a front-to-back and back-to-front motion.
Once you’ve removed the dust, you can clean the stylus needle by using the stylus brush. It’s important to keep the dust away from the needle. Cats can mistake it for a toy and play with the tip of the needle. If you have a large dog, you should also avoid letting your cat sit on the dust cover. This way, you can easily avoid any accidents involving your cat.
You can use a degreaser as an alternative to alcohol. It’s best to use a degreaser that is alcohol-based. Then, you can place the cotton bud on the stylus and hold it against the needle. You should hold it against the stylus, but not move it from one side to the other. The degreaser will act as a substitute for a stylus cleaner.
Read More: Best Turntable For Sampling
You can also use a melamine eraser. This is a handy tool for cleaning the stylus and capturing any dust. The eraser should be about 1.5 inches long and 0.5 inches thick. You can cut it with scissors or a craft knife. Then, you can insert the eraser into the stylus and then pull it out. Besides using an eraser, it’s best to use a magnifying glass when you’re cleaning the turntable.
You can also use a melamine eraser to clean the needle. It will help you clean your turntable needle by trapping dust and preventing it from moving around. A melamine eraser will not be as effective as an electronic cleaner but it will do the job just as well. If you’re unsure of how to clean a turntable needle, you can buy a Mr. Clean magic eraser at any hardware store.