How to Replace Audio-Technica Ear Pads


This is a task which you can carry out by yourself, or you can contact the company’s customer service department for help. If you’re unsure how to do it yourself, you can consult a video or a book. You can also visit a local electronics store for replacement ATH-R70x ear pads. At the end, if you decided on doing it personally, below are the guidelines.

, How to Replace Audio-Technica Ear Pads

First, you’ll need to remove the headphones from the headphone. The pads are usually attached to the headphone using screws or a plastic lip. On some headphones, you can simply remove the earpad by prying it open. If you can’t find a tool, you can use a hairband to do the job. The process will depend on the type of earphone you have, but it is easy to find a replacement.

Read Also:- Audio Technica AT95E Review 2021

After removing the headphone’s ear pads, you need to remove the hairbands and clean them with a damp cloth. The hairbands will fit into the grooves and plastic lip of the headphones, making it easy to install the replacement. To replace the earpads, insert the hairbands into the holes and abrasive paper. Do not use abrasive cleaners to remove the old pads. This can damage your headphone and cause it to lose performance.

The next step is to remove the old headphone pads and remove the old ones. Using a prying tool can be very useful in replacing headphones. These can be purchased in any technology store. Some people prefer to use an unused plastic card, a dull butter knife, or even their hands. The prying tool should be able to separate the earbuds and headphone pads from each other. When the process is complete, wipe the headphone pads with an old toothbrush to remove any dust or glue residue.

Read More:- Where Are Audio Technica Headphones Made?

The next step in replacing the earbuds is to replace the earpads with new ones. After removing the old pads, wipe them with a dry cloth. This will prevent the headset from sweating. Afterward, you can use the same method to remove the old headphones. You can use any tools that you have in your home to replace the aforementioned earbuds. Just remember to wipe the headsets with a clean rag after using it for a few hours to prevent any buildup of sweat or oil.

To replace the earbuds, you need to remove the earphone pads. To do this, you should remove the headphone driver and the headphone earmuffs. Afterwards, use an old toothbrush to rub the glue off the headphone drivers. Then, wipe them with an alcohol-soaked cloth. If you want to replace the earbuds, you should do it right away.

Leave A Reply

Please enter your comment!
Please enter your name here

2 − 2 =